Characteristic of machine

1. Both-edge operation, each station simultaneously use two molds, to improve production capability. The machine covers small area.
2. Heating plate is adopted electricity control, up and low mold can be adjustable, to guarantee the optimized vulcanization quality.
3. Temperature of heat plate is adopted precious P.I.D control system, to accurately control the temperature of mold.
4. Each oil circuit system is independently controlled, stations don't need to inter-waiting, production operational is better consistency.
5. The sliding mold is designed by separation, it would not affect operation to the machine as it is moving, the operation is smooth.
6. Pre-plastic vulcanization deflation time, each station can be freely set according to the mold, the production can be freely measured.
7. Hand-made heat pressure mold can be shared to use.
8. Direct press oil cylinder die clamper design, which is applicable to molds with different thickness.
9. Automatically mold=sliding design, plate is automatically side-turned mechanical hand, which diminishes the collision of mold, reduce labor strength of workers, reach labor-saving capability.

Operational design

1. One person can simultaneously operate multi-stations, to save labor cost.

2. Automatically enter or exit sliding mold, automatically side-turned plate, conveniently to take out finished-product, the operation is easy, female operator can shoulder the job.

3. Inter-direction machine operation, featuring simultaneously inter-lock function, the operation is safe.

4. Fix up low mold to the sliding plate, it can be produced, the speed of mold change is quick.

5. Independently operate and control each station, relying on requirement of manufacture, repair and maintenance, to decide station number, at the same time to save electric power.